Specification
- Product:
– Stainless Steel fittings comply with ASME BPE standards. - Sizes:
– Stainless Steel fittings are available in sizes .” – 6” O.D. tube size.
Materials
Fittings are fabricated in AISI 316L Stainless Steel with sulfur content of 0.005-0.017% achieving superior repeatability for automatic orbital welding process
Surface Finish
Reference: ASME BPE-2014, Part SF, Table SF-2.4-1.
|
Surface Finish Code |
BPE Surface Designation |
Inside Surface |
Outside Surface |
||
|---|---|---|---|---|---|
|
Ra Maximum |
Surface Condition |
Surface Condition |
|||
|
μ-in. |
μm |
||||
|
PL |
SF1 |
20 |
0.51 |
Mechanically Polished* |
Mechanically Polished |
|
PM |
SF4 |
15 |
0.38 |
Mechanically Polished* & Electro-polished |
Mechanically Polished |
*: Or any other finishing method that meets the Ra max.
ASFLOW EP Exceeds the ASME BPE Quality Requirements
- The table below shows how ASFLOW EP exceeds the ASME BPE quality requirements.
- Please refer to ASFLOW homepage “Bio Tubes”
|
Attribute |
ASME BPE Recommendation |
ASFLOW Electro-polishing |
|---|---|---|
|
EP layer Thickness |
15Å < |
20Å < |
|
Cr/Fe ratio |
1 < |
1.5 < |
Ordering Information
|
① |
Brand |
|---|---|
|
ABB |
ASFLOW BIO FITTING |
|
ABC |
ASFLOW BIO GASKET |
|
② |
Item |
|---|---|
|
TE2S |
90° ELBOW |
|
TE2C |
90° ELBOW CLAMP ONE END |
|
TEG2C |
90° ELBOW CLAMP TWO END |
|
③ |
Material |
|---|---|
|
6L |
Stainless steel 316L |
|
S4 |
Stainless steel 304 |
|
④ |
Size |
|---|---|
|
04 |
1/4″ |
|
06 |
3/8″ |
|
08 |
1/2″ |
|
12 |
3/4″ |
|
16 |
1″ |
|
24 |
1-1/2″ |
|
32 |
2″ |
|
40 |
2-1/2″ |
|
48 |
3″ |
|
64 |
4″ |
|
96 |
6″ |
|
⑤ |
Surface Finish Code |
|---|---|
|
PL |
SF1 |
|
PM |
SF4 |
Dimension
ABB-TE2S – 90° ELBOW
BPE TABLE # DT-4.1.1-1
| Nominal Size in. | Dimensions | Ordering Code | |
|---|---|---|---|
| A in. | A mm | ||
| 1/4″ | 2.625 | 66.7 | ABB-TE2S6L.25-.. |
| 3/8″ | 2.625 | 66.7 | ABB-TE2S6L.375-.. |
| 1/2″ | 3.000 | 76.2 | ABB-TE256L.5-.. |
| 3/4″ | 3.000 | 76.2 | ABB-TE2S6L.75-. |
| 1″ | 3.000 | 76.2 | ABB-TE2S6L1.0-.. |
| 1-1/2″ | 3.750 | 95.3 | ABB-TE2S6L1.5-… |
| 2″ | 4.750 | 120.7 | ABB-TE2S6L2.0-.. |
| 2-1/2″ | 5.550 | 139.7 | ABB-TE2S6L2.5-.. |
| 3″ | 6.250 | 158.8 | ABB-TE2S6L3.0-.. |
| 4″ | 8.000 | 203.2 | ABB-TE2S6L4.0-… |
| 6″ |
11.500 | 292.1 | ABB-TE2S6L6.0-.. |
ABB-TE2S – 90° ELBOW CLAMP ONE END
BPE TABLE # DT-4.1.1-2
| Nominal Size in. | Dimensions | Ordering Code | |||
|---|---|---|---|---|---|
| A in. | A mm |
Bin. |
B mm | ||
| 1/4″ | 2.625 | 66.7 | 1.625 | 41.3 | ABB-TE2C6L.25-.. |
| 3/8″ | 2.625 | 66.7 | 1.625 | 41.3 |
ABB-TE2C6L.375-.. |
| 1/2″ | 3.000 | 76.2 | 1.625 | 41.3 |
ABB-TE2C6L.5-.. |
| 3/4″ | 3.000 | 76.2 | 1.625 | 41.3 | ABB-TE2C6L.75-.. |
| 1″ | 3.000 | 76.2 | 2.000 | 50.8 | ABB-TE2C6L1.0-.. |
| 1-1/2″ | 3.750 | 95.3 | 2.750 | 69.9 | ABB-TE2C6L1.5-.. |
| 2″ | 4.750 | 120.7 | 3.500 | 88.9 | ABB-TE2C6L2.0-.. |
| 2-1/2″ | 5.550 | 139.7 | 4.250 | 108.0 | ABB-TE2C6L2.5-.. |
| 3″ | 6.250 | 158.8 | 5.000 | 127.0 | ABB-TE2C6L3.0-.. |
| 4″ | 8.000 | 203.2 | 6.625 | 168.3 | ABB-TE2C6L4.0-… |
| 6″ |
11.500 | 292.1 | 10.500 | 266.7 | ABB-TE2C6L6.0-.. |
ABB-TE2S – 90° ELBOW CLAMP TWO END
BPE TABLE #DT-4.1.1-3
| Nominal Size in. | Dimensions | Ordering Code | |
|---|---|---|---|
| A in. | A mm | ||
| 1/4″ | 1.625 | 41.3 | ABB-TEG2C6L.25-.. |
| 3/8″ | 1.625 | 41.3 |
ABB-TEG2C6L.375-.. |
| 1/2″ | 1.625 | 41.3 | ABB-TEG2C6L.5-… |
| 3/4″ | 1.625 | 41.3 | ABB-TEG2C6L75-.. |
| 1″ | 2.000 | 50.8 | ABB-TEG2C6L1.0-.. |
| 1-1/2″ | 2.750 | 69.9 | ABB-TEG2C6L1.5-.. |
| 2″ | 3.500 | 88.9 | ABB-TEG2C6L2.0-.. |
| 2-1/2″ | 4.250 | 108.0 | ABB-TEG2C6L2.5-.. |
| 3″ | 5.000 | 127.0 | ABB-TEG2C6L3.0-.. |
| 4″ | 6.625 | 168.3 | ABB-TEG2C6L4.0-.. |
| 6″ |
10.500 | 266.7 | ABB-TEG2C6L6.0- |
